Propulsion: reassembling the engine

U.S. Air Force Senior Airman Jaymie Sanarez and Senior Airman Monhuan Lee, 20th Component Maintenance Squadron aerospace propulsion journeymen, prepare to work on a number three sump housing, which houses part of the F110-129D engine at Shaw Air Force Base, S.C., March 29, 2017. The number three sump housing will be part of one of the first 6,000 total accumulated cycle F110-129D engines that is scheduled to be built for the F-16CM Fighting Falcon. (U.S. Air Force photo by Airman 1st Class BrieAnna Stillman)

Photo Details / Download Hi-Res
Propulsion: reassembling the engine

U.S. Air Force Senior Airman Monhuan Lee, 20th Component Maintenance Squadron aerospace propulsion journeyman, tightens a bolt on a fan frame at Shaw Air Force Base, S.C., March 29, 2017. The fan frame makes up part of the F110-129D engine as a support fan. (U.S. Air Force photo by Airman 1st Class BrieAnna Stillman)

Photo Details / Download Hi-Res
Propulsion: reassembling the engine

U.S. Air Force Senior Airman Monhuan Lee, 20th Component Maintenance Squadron aerospace propulsion journeyman works on the number three sump housing, which houses part of the F110-129D engine at Shaw Air Force Base, S.C., March 29, 2017. The number three sump housing is one of five sump housings that will be used when reassembling the F110-129D engine. (U.S. Air Force photo by Airman 1st Class BrieAnna Stillman)

Photo Details / Download Hi-Res
Propulsion: reassembling the engine

U.S. Air Force Airman 1st Class Jesus Ortega, 20th Component Maintenance Squadron (CMS) aerospace propulsion journeyman, left, Airman 1st Class Caleb Gulley, center, and Airman 1st Class Andrew Setrin, right, 20th CMS aerospace propulsion apprentices, work together on the number two sump housing at Shaw Air Force Base, S.C., March 29, 2017. The number two sump housing works with the number three sump housing as the support fan and core compressor rotors for the F110-129D engine. (U.S. Air Force photo by Airman 1st Class BrieAnna Stillman)

Photo Details / Download Hi-Res
Propulsion: reassembling the engine

U.S. Air Force Airmen measure a bearing at Shaw Air Force Base, S.C., March 29, 2017. Each bearing is measured to ensure the most precise fit on one another as part of the reassembly for the F110-129D engine. (U.S. Air Force photo by Airman 1st Class BrieAnna Stillman)

Photo Details / Download Hi-Res
Propulsion: reassembling the engine

U.S. Air Force Staff Sgt. Elizabeth Tapley, 20th Component Maintenance Squadron (CMS) aerospace propulsion craftsman, inputs serially tracked parts into a computer at Shaw Air Force Base, S.C., March 29, 2017. Each part is tracked to ensure 20th CMS Airmen know which parts are being installed onto the F-16CM Fighting Flacon engine. (U.S. Air Force photo by Airman 1st Class BrieAnna Stillman)

Photo Details / Download Hi-Res

Propulsion: reassembling the engine

Published April 4, 2017
By Airman 1st Class BrieAnna Stillman
20th Fighter Wing

SHAW AIR FORCE BASE, S.C. --

USAFWC & NELLIS News

Propulsion: reassembling the engine

Propulsion: reassembling the engine

Propulsion: reassembling the engine

Propulsion: reassembling the engine

Propulsion: reassembling the engine

Propulsion: reassembling the engine

Propulsion: reassembling the engine

Videos

USAFWC & Nellis Top Stories